Finding the right 2017 nissan titan fuel door spring can be surprisingly difficult because Nissan uses different spring part numbers across trucks, SUVs, and model years. The most important step is separating a genuine fuel-door component from a similarly named hood strut or a part designed for another Nissan platform.
My first choice is TIKMAX Front Hood Gas Struts. Its direct 2017-2022 Titan fitment, 13.4-inch extended length, and claimed five-minute installation make it the clearest vehicle-specific option in the supplied selection.
My second choice is MOTOKU Fuel Door Filler Spring. It is a better functional match for the component type, although the listed fitment does not include the 2017 Titan, so it suits buyers who can confirm an interchangeable part number rather than those shopping by vehicle name alone.
The comparison below explains what each part is actually intended to do, where the listed fitment helps, and where it creates a warning. The buying guidance then covers part-number matching, installation, troubleshooting, maintenance, and the mistakes most likely to leave a fuel door loose or difficult to open.
5 Best 2017 Nissan Titan Fuel Door Spring
I selected these products using the supplied relevance scores, the amount of useful fitment and installation information, available customer-feedback evidence, and brand variety where a different source offered a meaningful alternative. Because the list contains both direct fuel-door clips and a Titan hood-strut set, the rankings should be read alongside the compatibility limitations rather than as proof that every item fits the same opening.
| # | Image | Product | Price on Amazon |
|---|---|---|---|
| 1 |  |
TIKMAX Front Hood Gas Struts | Check Price |
| 2 |  |
MOTOKU Fuel Door Filler Spring | Check Price |
| 3 |  |
Autycle Fuel Gas Tank Door Cover Spring Clip Replacement | Check Price |
| 4 |  |
Nissan Nissan Parts Fuel Door Spring 78836-3S500 | Check Price |
| 5 |  |
NISSAN 78836-0W000 Fuel Door Spring | Check Price |
TIKMAX Front Hood Gas Struts
The TIKMAX set earns the first position mainly because it is the only listing here that clearly names the 2017-2022 Nissan Titan. That vehicle-specific information is valuable when a truck owner is trying to replace worn lift support hardware, but the product is a pair of front hood gas struts, not a fuel-door spring. It should not be purchased as a direct replacement for the small clip that helps the fuel flap open or stay positioned.
For the job it is designed to perform, the package is practical. Two struts are supplied, and the listed 13.4-inch extended center-to-center length gives a buyer a concrete measurement to compare against the original hood supports. The interchange references, including 65470-EZ40A and several additional numbers, may also help confirm the right application when a truck’s existing parts are being replaced.
The advertised five-minute installation using only a flat screwdriver is appealing to a beginner. Still, installation time can vary with access, corrosion, and the condition of the retaining clips. A buyer should compare the old strut ends and part numbers before ordering, and should support the hood safely instead of relying on a weak strut during removal.
Pros
- Clearly listed for Nissan Titan model years 2017 through 2022.
- Includes two supports and a stated 13.4-inch extended length.
- Offers multiple interchange numbers for application checking.
- Designed for a simple hand-tool installation.
Cons
- It is a hood-lift component, not a fuel-door spring.
- The supplied data does not confirm fuel-door compatibility.
- Installation time may vary with vehicle condition.
My Opinion
This is the strongest vehicle-specific listing in the group but the wrong component for a fuel-flap repair. Choose it only when the actual problem is a Titan hood that will not stay open; for a fuel door, verify a dedicated spring or clip instead.
MOTOKU Fuel Door Filler Spring
MOTOKU is a more relevant design match because this listing is explicitly a fuel door filler spring and includes one fuel-tank door cover spring clip. Its stated applications cover Nissan Xterra models from 2005-2015, Pathfinder models from 2005-2012, and Frontier models from 2005-2021. That broad Nissan coverage makes it worth investigating, but it does not establish a fit for a 2017 Titan.
The three replacement numbers—78836-ZP40A, 78836-EA000, and 78836-ZP00A—are the most useful buying clues. A buyer should compare those references with the original part, a Nissan parts diagram, or a dealer confirmation before assuming that similar Nissan hardware will snap into the Titan fuel-door hinge. Model-year overlap among Nissan trucks is not enough by itself.
Its single-clip package is appropriate when the old spring has broken or disappeared and the rest of the fuel-door hinge remains usable. It is less suitable if the flap is bent, the hinge is damaged, or the problem is actually a release cable or latch. Since only one replacement piece is supplied, inspect the original arrangement before disassembly so the new clip is installed in the same orientation.
Pros
- Clearly identified as a fuel-door spring rather than unrelated body hardware.
- Lists three replacement part numbers.
- Covers several Nissan vehicle families and years.
- One clip is suitable for a single broken-spring repair.
Cons
- The supplied fitment list does not include the 2017 Nissan Titan.
- Only one spring clip is included.
- Compatibility with the Titan is not confirmed by the provided data.
My Opinion
This is the best functional alternative for someone who needs a Nissan fuel-door spring and can prove interchangeability. It ranks below a confirmed Titan part because the listed applications stop short of the target truck, but its part-number information gives careful buyers a sensible starting point.
Autycle Fuel Gas Tank Door Cover Spring Clip Replacement
Autycle offers another dedicated fuel-door clip, with the product description focused on restoring a gas-tank door that no longer opens normally. The listed vehicles are Nissan NV1500, NV2500, and NV3500 vans from 2012-2021, and the stated original-equipment reference is 78836-1PA0A. That makes the item more relevant in function than the TIKMAX struts, while still leaving a major fitment gap for the Titan.
The practical benefit is simple: a broken or missing spring clip may force an owner to wedge something into the flap or use an inconvenient release method. Replacing the small hinge spring can restore normal opening behavior when the door and hinge are otherwise sound. The description does not provide dimensions or a Titan interchange reference, so visual similarity should not be treated as confirmation.
Autycle provides a useful installation hint: remove the old spring with a screwdriver, then install the new clip while the gas door is about halfway open rather than fully open. That detail can help the clip slide into position without excessive force. Work slowly around the painted door edge, because a slip from the screwdriver can cause cosmetic damage even when the spring itself is inexpensive.
Pros
- Purpose-built as a fuel-gas-door spring clip.
- Provides a specific OE reference, 78836-1PA0A.
- Includes a practical halfway-open installation position.
- Addresses a common broken-hinge-spring symptom.
Cons
- Listed applications are Nissan NV vans, not the Titan.
- No dimensions are supplied for an independent comparison.
- The data does not confirm interchangeability with the target truck.
My Opinion
This is a useful example of the correct component style, and its installation guidance is better than a bare part-number listing. However, the NV-specific application keeps it behind MOTOKU for a Titan search; buy it only after matching the spring’s number and physical shape to the original.
Nissan Nissan Parts Fuel Door Spring 78836-3S500
The Nissan-branded 78836-3S500 has a strong appeal for buyers who prioritize an OEM part over a generic replacement. The listing identifies it as vehicle-specific, genuine Nissan, and backed by a manufacturer warranty, while also stating that it is not aftermarket. Those details suggest a buyer may get closer to factory fit and finish when the part number is correct.
The limitation is equally important: the supplied information does not name the 2017 Titan or provide a vehicle list. “Vehicle specific” is helpful only after the specific vehicle and production details are confirmed. Nissan part numbers can serve several platforms or change across revisions, so the number 78836-3S500 should be checked against the truck’s VIN, an official parts catalog, or the original spring before purchase.
This option may be attractive when a dealer or parts lookup confirms the number for the fuel-door assembly. It is less forgiving for guesswork than a generic clip because the higher confidence associated with the Nissan name does not automatically overcome an incorrect application. The listing also does not describe installation steps, dimensions, or package quantity beyond identifying the spring, so those details should be clarified before ordering.
Pros
- Genuine Nissan branding and an identified part number.
- Listed as OEM rather than aftermarket.
- Manufacturer warranty information is provided.
- Potentially preferable when factory specification is the priority.
Cons
- 2017 Titan compatibility is not stated in the supplied data.
- No installation guidance or dimensions are listed.
- Part-number confirmation remains the buyer’s responsibility.
My Opinion
This could be the most reassuring choice if a Nissan parts lookup confirms 78836-3S500 for the exact truck. Without that confirmation, the OEM label alone is not enough to recommend it over a clearly identified application, so treat it as a verification-dependent option.
NISSAN 78836-0W000 Fuel Door Spring
The NISSAN 78836-0W000 is the simplest listing in the group: a genuine Nissan fuel-door spring identified by part number and described as being made to meet specifications for fit, form, and function. That concise identity is useful for shoppers who already have this exact reference from a parts catalog or from the original component.
On the other hand, only two customer ratings are supplied, and the listing does not name compatible vehicles, model years, dimensions, or installation instructions. The phrase “fits your specific vehicle” is not enough to establish that the part fits a 2017 Titan unless the seller’s fitment tool or another reliable Nissan source confirms it. This is a product where an exact number match matters much more than a general brand match.
It may suit an owner who has already diagnosed a broken spring and wants a factory-branded replacement rather than an aftermarket clip. Before removing the old part, photograph its orientation and compare its shape with the replacement. If the fuel door still fails to open after a correctly matched spring is installed, the fault may be in the hinge, latch, release mechanism, or surrounding body panel rather than the spring itself.
Pros
- Genuine Nissan fuel-door spring identification.
- Clear part number: 78836-0W000.
- Designed around stated factory fit, form, and function specifications.
- Appealing to buyers seeking an OEM replacement.
Cons
- Only two customer ratings are supplied as evidence.
- No vehicle-specific fitment list is provided.
- Installation details and measurements are absent.
My Opinion
This is a reasonable catalog-driven purchase, not a safe guess. If 78836-0W000 is confirmed for the truck, its genuine Nissan identity is a meaningful advantage; without that confirmation, the sparse fitment information makes it difficult to place above the other dedicated clips.
How I Selected These 2017 Nissan Titan Fuel Door Spring Options
The list contains an important mismatch, so selection required more than sorting by brand name or customer score. I considered whether each item was actually a fuel-door component, whether the supplied data named the 2017 Titan or another Nissan vehicle, whether a replacement number was available, and whether the listing offered practical information such as installation guidance or a stated measurement.
The first-ranked item is unusual because it is a Titan-specific hood strut rather than a fuel-door spring. It remains in the comparison because it is relevant to the vehicle but should not be confused with the target repair. The next two products are clearly spring clips but are listed for other Nissan families, while the final two are genuine Nissan parts that require stronger part-number verification.
A familiar Nissan logo or a similar-looking clip does not prove fitment. The vehicle application and replacement number must agree.
Customer feedback was treated as supporting evidence rather than a substitute for compatibility data. A high score can indicate satisfaction with a product, but it cannot turn a hood strut into a fuel-door spring or make an NV-van clip automatically fit a Titan.
The safest ranking is not always the shortest route to a purchase; it is the option that makes the part’s purpose and application easiest to verify.
How to Choose a 2017 Nissan Titan Fuel Door Spring
Start with the failed part, not the search result title. Open the fuel flap carefully, identify whether the spring is missing or broken, and compare the original part’s shape and number with the replacement listing. If the original is still installed, take clear photographs before removing it.
- Confirm the component type: A fuel-door spring is a small hinge or cover spring. Hood gas struts, tailgate supports, and release-cable parts perform different jobs.
- Match the part number: Numbers such as 78836-3S500, 78836-0W000, and 78836-1PA0A should not be treated as interchangeable without a reliable catalog or seller confirmation.
- Check exact vehicle details: Use the 2017 model year, Titan trim, body configuration, and VIN when an official fitment lookup is available.
- Compare physical design: Look at the spring’s bends, hooks, mounting tabs, overall width, and orientation. A small difference can prevent proper tension or damage the hinge.
- Consider package quantity: A listing for one clip may be correct for one fuel door, but do not assume a second spring is included unless the package explicitly says so.
Part number versus visual similarity
Part numbers are usually the better starting point because a spring can look nearly identical while using a different bend or mounting point. Visual comparison still matters, especially when an older part has stretched, rusted, or broken into pieces, but it should support—not replace—application confirmation.
OEM or aftermarket
Genuine Nissan parts may appeal to owners who want factory branding and a catalog-backed fit, provided the number is correct. Aftermarket clips may offer a practical repair and clearer installation guidance, but their value depends on verified interchangeability rather than the fact that they are inexpensive or visually familiar.
Compatibility Checks Before Ordering
Compatibility deserves extra attention because the supplied products span Titans, Xterras, Pathfinders, Frontiers, and NV vans. Nissan used related hardware across some vehicles, but the provided data does not establish that any one spring crosses into the 2017 Titan.
Use the original spring as evidence
If the spring has not completely disappeared, photograph both sides and note how it sits in the hinge. Measure its approximate width and compare the hooks or tabs. Do not force a replacement into place simply because its length looks close.
Use a VIN-based lookup when possible
A VIN-based Nissan parts search can resolve differences that a broad model-year search misses. It is especially important for the two genuine Nissan listings because neither supplied description names the Titan application directly.
Ask the seller a precise question
Instead of asking whether a part fits “a Nissan truck,” provide the full year, model, trim if relevant, and the original part number. Ask whether the replacement is a fuel-door hinge spring and whether the stated number is an interchange reference or merely a product identifier.
For this vehicle, a careful buyer should also distinguish a spring problem from a release problem. If the door opens when manually pulled but does not pop outward, the spring may be at fault; if the fuel flap remains locked or the interior release has no effect, another part may need attention.
Installing the Replacement Spring Safely
Most small fuel-door spring clips are simple to replace, but the work takes patience because the mounting area is close to painted bodywork. Work in good light, keep the fuel door partially open as needed, and avoid prying against the outer painted edge.
- Park on a stable surface, switch off the engine, and allow the area around the fuel filler to cool.
- Open the fuel door and photograph the original spring’s position before removal.
- Use a suitable flat screwdriver to release the old clip carefully. Protect the paint with a thin layer of cloth or tape where the tool may contact the body.
- Compare the new spring with the old one before installing it. Stop if the hooks, bend, or mounting points do not match.
- Follow the seller’s stated position if available. For the Autycle clip, the supplied guidance calls for the door to be about halfway open, not fully open, while sliding the spring into place.
- Test the door gently several times. It should move without scraping, binding, or needing excessive force.
Do not hold the fuel door open by pulling hard on the flap while installing the clip. Excessive leverage can bend the hinge or misalign the door, creating a second problem that a new spring cannot correct.
Testing the Fuel-Door Repair
A successful spring replacement should restore consistent movement, but the exact feel depends on the condition of the hinge and door. Test the flap with the vehicle stationary and the fuel cap closed before assuming the repair is complete.
- Check that the door sits reasonably flush with the surrounding body panel.
- Open and close it several times without pushing sideways on the flap.
- Listen for scraping, popping, or metal-on-metal contact.
- Confirm that the spring stays seated instead of walking out of its mounting point.
- Make sure the fuel cap and filler area remain accessible without the door catching.
If the spring immediately slips out, the mounting tab may be bent or the replacement may be the wrong design. If the spring stays in place but the door remains loose, inspect the hinge and door alignment rather than repeatedly replacing clips.
Common Mistakes to Avoid with a Fuel-Door Spring
Most failed repairs come from buying by a vague vehicle description or forcing a nearly compatible clip into the hinge. A few simple precautions can prevent damage and wasted time.
- Do not confuse hood hardware with fuel-door hardware. The TIKMAX product names the Titan clearly, but it supports the hood and cannot replace a fuel-flap spring.
- Do not assume every Nissan spring is shared. Xterra, Frontier, Pathfinder, NV, and Titan applications may use different clips.
- Do not install without recording orientation. A spring installed backward may create weak or reversed tension.
- Do not pry against exposed paint. Protect the edge and use controlled pressure with the correct tool.
- Do not ignore a bent hinge. A new spring may fail quickly if the door or mounting point is already distorted.
- Do not discard the old part immediately. Keep it until the replacement is confirmed and the door operates correctly.
If the listing does not identify the Titan or provide a matching replacement number, treat the item as unconfirmed until a reliable fitment source says otherwise.
Maintenance and Ownership Tips
A fuel-door spring normally needs little attention, but the surrounding hinge can collect dust, road salt, and spilled fuel residue. Keeping the area clean reduces friction and makes it easier to notice a spring that is beginning to shift.
Wipe dirt from the hinge area with a clean cloth during normal vehicle washing. Avoid spraying an unknown lubricant directly into the filler opening or onto the fuel cap. If lubrication is recommended by the vehicle’s service information, apply only a small amount to the appropriate hinge point and keep it away from the sealing surfaces.
Do not use the fuel flap as a handle or push it sideways to close it. Gentle, straight movement reduces strain on the spring and hinge. When fueling, make sure the nozzle, cap, or tether is not pressing against the door as it closes.
When a replacement is not the real fix
A spring is only one part of the fuel-door assembly. Continued trouble after installation may point to a bent hinge, damaged mounting tab, latch interference, body-panel misalignment, or a separate interior release mechanism.
Look for uneven gaps around the flap, fresh scratches, looseness at the hinge, or a door that springs open only when pushed from one side. Those signs suggest that replacing another clip without inspecting the assembly could lead to repeated failures.
Troubleshooting After Installation
The door will not open
Check whether the spring is seated correctly and whether the flap is rubbing the body panel. If the vehicle uses a separate latch or release mechanism, confirm that it is not holding the door closed. Never force the door with a screwdriver from the painted exterior.
The door opens but will not stay aligned
Inspect the hinge for bending and compare the door gap with the opposite panel lines. A wrong spring can create too much or too little tension, while a bent hinge can keep a correct spring from working normally.
The spring keeps popping out
Stop cycling the door and compare the replacement with the old clip. The mounting tab may be damaged, the installation angle may be wrong, or the part may belong to another Nissan application. The Autycle guidance specifically calls for a halfway-open door during installation, which illustrates why position can matter.
The fuel door works but feels stiff
Look for dirt, paint buildup, or contact between the flap and body panel. Stiff movement should not be solved by bending the spring. Correct the interference first, then check whether the clip is installed in its intended orientation.
FAQ About the 2017 Nissan Titan Fuel-Door Spring
Is the TIKMAX Titan hood strut a replacement for the fuel-door spring?
No. It is a front hood gas strut set for listed 2017-2022 Nissan Titan applications. It supports the hood and is not the small spring clip used at the fuel flap.
Does the MOTOKU spring fit a 2017 Nissan Titan?
The supplied fitment information lists the Xterra, Pathfinder, and Frontier, but not the 2017 Titan. Confirm the replacement number and physical design with a Nissan parts source before ordering.
What part number is listed for the Autycle fuel-door clip?
Autycle lists 78836-1PA0A and 788361PA0A. The description identifies Nissan NV1500, NV2500, and NV3500 applications from 2012 through 2021, so Titan compatibility is not established.
Are the genuine Nissan springs automatically interchangeable?
No. Genuine branding confirms the source described by the listing, not universal compatibility. The 78836-3S500 and 78836-0W000 numbers should each be checked against the exact vehicle and parts catalog.
Can a broken fuel-door spring damage the fuel system?
A broken spring usually affects the movement or positioning of the exterior flap, not the sealed fuel system itself. However, a loose or misaligned door can expose the filler area to more dirt and may indicate hinge or body damage that should be addressed.
Final Thoughts
For a true fuel-door repair, verify the original part number before choosing among these options. The MOTOKU Fuel Door Filler Spring is the more relevant alternative when interchangeability is confirmed, while the TIKMAX Front Hood Gas Struts for Nissan Titan 2017-2022 is the first choice only for a hood-support problem—not a fuel-flap spring. Careful fitment checking remains the deciding step for any 2017 nissan titan fuel door spring purchase.